Gerxin

網路會員

2004/08/28 09:27 請先登入後才可回應

器材: 其他其他

Is there any simple & fast method to correct a scan file from film with satisfy output ?
(Of course I believe that satisfy doesn"t mean perfect, what I ask for is just like the auto-focus. One click to give a 98% close focus, but not perfect)

Recently I want to buy a film scanner to change my film to digital file.
I have tried the flatbed epson 1670, colour not good and burst.
I have tried epson 4780, better colour & sharper, but expensive.
Dual IV $2200, sounds good, but not tried yet.

I understand that even using a very good scanner, the image has to be toned to give a better quaility picture. Many people say that the scanning time is not long compare to the toning and adjustment time.

So I would like to ask is there any fast method to give a near perfect/optimal result?

jsklee 網路會員	41) 2004/08/30 21:00 "But I think vuescan is warmer bor, did you write it wrong." The first crop shows the blue sky. Nikon gives a purple sky, while Vuescan gives blue sky. Welcome all comments.
jsklee 網路會員	42) 2004/08/30 21:01 "拎卷negative去"快記"D&P，兼順便出埋CD-ROM的質素如何?" I think they could be just used for web-sharing only.
Peter LO 網路會員	43) 2004/08/30 21:05 "拿去俾人scan 算啦.......... 我想你scan 了十卷左右, 你已經開始想在二手版放左部機去..." ^^^^^^^^^^^^^^^^^^^^^ 對，每次用film scanner，我都會怨自己為何這麼孤寒，買了個沒有auto loader的型號。我用LS-20掃一卷，連清潔底片最快也要1.5小時，真的非常費時。
stocklaz 網路會員	44) 2004/08/30 21:06 jsklee 兄, 你唔同佢, 佢的要求係 "any simple & fast method to correct a scan file from film with satisfy output " , 佢第一個post 又無話有 $$$ 上限，100卷菲林一次過去曬彩六係最快又最好的方法....... 快記唔好試, 試過你一定後悔...就算係佢so call 的高resolution version 都係得2mb 一個file 仲好貴.....
jsklee 網路會員	45) 2004/08/30 21:09 "我用LS-20掃一卷，連清潔底片最快也要1.5小時，真的非常費時。" I also agree that it is very time consuming! Normally, I have to spend 10mins (not maximum resolution) to scan one photos, that means 1 hour for 6 photos, and 6 hours for 1 roll!
jsklee 網路會員	46) 2004/08/30 21:09 "快記唔好試, 試過你一定後悔...就算係佢so call 的高resolution version 都係得2mb 一個file 仲好貴....." My 4000Ed could output 133Mb TIFF, is it good? haha!
Peter LO 網路會員	47) 2004/08/30 21:15 快記？得5R output的解像加上超重sharpening，真是慘不忍睹。
gigakpt 網路會員	48) 2004/08/30 21:22 我用Vuescan原因就係色準同快(我用batch scan) 用Nikon Scan 3.X，續張續張Crop同較色，真係人都顛同Vuescan有好多setting慢慢tune，亦可以選擇少D setting 有auto crop同較色已經省下唔少時間
stocklaz 網路會員	49) 2004/08/31 00:48 jsklee 請停止放毒啦~~~~ hahaha
jsklee 網路會員	50) 2004/08/31 01:20 stocklaz: 4000ED is out of production la! 8000ED/9000Ed instead! the scanning speed is reduced to half. haha!
jsklee 網路會員	51) 2004/08/31 01:20 "有auto crop同較色已經省下唔少時間" totally agree!!
jsklee 網路會員	52) 2004/08/31 01:24 cccyyy: I think Vuescan give more similar colour of the slide than NikonScan.
jsklee 網路會員	53) 2004/08/31 01:25 gigakpt: "Vuescan有無其他setting? 如果無set其他野，效果未必最理想" Since I am the first time to use this, any other setting that I must set? Thanks!
cccyyy 網路會員	54) 2004/08/31 10:25 jsklee 兄, 會否有興趣試埋 Silverfast Ai 比較?
gigakpt 網路會員	55) 2004/08/31 14:00 我試用過舊Version 響color folder到set advance 可以set矯番slide D color balance 同set番有關各種slide default color 除此之外，亦可手動作色彩較正不過default都唔差!
jsklee 網路會員	56) 2004/08/31 14:08 cccyyy: "會否有興趣試埋 Silverfast Ai 比較?" freeware?
jsklee 網路會員	57) 2004/08/31 14:09 gigakpt: "我試用過舊Version 響color folder到set advance 可以set矯番slide D color balance 同set番有關各種slide default color 除此之外，亦可手動作色彩較正" I use "none" in colour balance, coz I want it not to change so much.
cccyyy 網路會員	58) 2004/08/31 14:26 jskleey: Silverfast Ai 好似可以download 試用. 也可以在網上找到"其他" 版本. 如需要可e-mail 比你.
龍一新進會員	59) 2004/08/31 15:28 Gerxin兄: 小弟剛發了一個話題:"高質廉價代各位掃描正負片菲林" 希望可對兄台有點幫助
kkjy 網路會員	60) 2004/08/31 16:29 沖印時同時做光碟是否最快, 可放大12x16 當然要做到更大就要film scanner了

回上一層第一頁上一頁第3頁 / 共5頁到第頁下一頁最末頁	到 1 2 3 4 5 頁

手札小舖熱門商品

more..