新進會員
|
謝謝樓上兩位賜教。 再請教,如果是漏光的話為何只有某幾張漏光,其他的正常。 還有請教mickey_mouse可否詳述自己如何動手抓漏?
|
新進會員
|
There are some soft sponge around the body and the back cover within the camera body to prevent light leak. Those sponge may be broken or become so "hard" after year of services that fail to prevent light leak any more. It may not happen in every exposure because light leak may happen only when there are strong light from a specific direction.
For each 135 film cartridge, there are sponge/soft cloth to prevent light leak as well. So you can ask photo lab to give you some empty cartridges, break those cartriges and get those ssponge/soft cloth to stick to the sides of the backcover that you believe there is light leak. From you photo, I guess those areas are on the top and bottom side of the film. Just becare not to stick those sponge that will prevent film advancement.
You may need to try many times before you success to black all the light leak area. If you ask some technician to help you, you need to pay a lot of money to do simlar simple things. Tt even does not need any screw drivers and the empty film cartridges should be free of charge. So try do it yourself. |
新進會員
|
唉....這禮拜週末剛好碰到東北季風南下,原本排定的太加縱走調查也被迫延後,看看即將步入冬季,好天氣越來越少......進度越來越急,時間越來越難配合,好久沒有殺殺快門了,真令人心煩阿 |
新進會員
|
tagar兄,唉!經過深思的結果,偶實在無法買下您那台NF-1,在這裡真的是要向您至上十二萬分的歉意,這幾天如果您有空,可以到小弟的寒舍來,小弟請您喝杯咖啡,聊表一下歉意! |
新進會員
|
謝謝你詳細的回答,mickey_mouse. The information is really helpful. 另外,我發現為何特定幾張底片漏光,因為這些漏光的底片都是在漏光處停留比較久的,如果我快速的連按幾張都不會有漏光的情形,稍微間隔久一點,就出現前一張底片不正常漏光現像。 |
新進會員
|
jun65兄 幹嘛這麼說咧....... 這也是給我個機會看我是否保得住這台NF-1 不過你那裡我是一定得找個機會去坐坐 埔里那邊搞定了嗎 ....順便有些事要向你請教 你什麼時候比較有空 對了jun65 你府上那裡啊 我星期三去金門 可能待個四五天 想順便帶些跟台灣本島比較不一樣的生態照片和影片回來 不知線上兄台有沒有人可以給我些意見 |
新進會員
|
bjbruce:
Just to remind you that the film are in reverse position in the camera body. so when light leak is on the upper right corner of the photo, then it is the lower left corner in the camera. |
新進會員
|
waynewei806 我剛買了p-6 的接寫環 想試試用120來拍拍小蟲小花小草 大山大水沒心情理你的時候 就換換口味吧.....
|
新進會員
|
tagar兄,明天晚上如何?偶會再打電話給您。 |
新進會員
|
偶得接我家母老虎下班 八點以後就比較沒自己的時間 优其接下來要去金門.......我得小心虎爪 下午你在忙嗎 |
新進會員
|
bjbruce~ 看似快門簾出了問題~ 短暫的不順或這麼時好時壞很難抓出問題! 若決心自己抓問題 1.嘗試1/60以下快門拍一些 2.1/60以上快門拍一些 然後檢查-狀況 我會懷疑在2.狀況會多一點 若是~機身快門要清洗、潤滑一次 有效嗎? 燒香保佑了 cc |
新進會員
|
請問一下各位前輩阿 AE-1 以前有沒有可以選購的內裝配備阿 例如說可以另外購置對焦屏 好像只有聽說NF-1可以換 不知道AE-1有沒有得選的 恩......... 另外就是 買以前A系列專用的閃燈 或是買現在市面上出的閃燈好呢? 以AE-1來說的話 |
新進會員
|
之前買的東西一直都沒時間試拍, 連到台灣的計劃亦要押後, 正在洩氣中... >_<
我的第一台AE-1亦有漏光的情況出現, 看來此機頗易有此問題... 我的方法是不去找哪兒漏光, 總之整個機背的接合位都黏入一些黑色軟膠條來增加機背的接合度; 當然, 用米奇兄所述之材料的效果應該更好。
AE-1沒有其他對焦屏可換, A系列中只有A-1及AE-1Program才有不同的對焦屏可換, 不過現在應該頗難找。 |
新進會員
|
godmars兄 是要來台灣玩耍嗎 還是另有要公
littlepig4260 兄 canon FD的閃燈系列 老實我並不怎麼欣賞 現在還找得到的大多像是188a 277T(T系列多了紅外線測距) ,因為機身並沒有TTL閃燈的功能,所以使用專 用閃燈只是會強制把你的快門速度降到同步速度;以及在光圈環切到A時,可以由閃燈控制光圈的大小。 所以我覺得不如買像METZ這樣的可換接腳閃燈,目前用在AE-1使用單點接腳即可 ,以後換了其它功能較多的機身再換其它的接腳。 由於閃燈的壽命有限,老閃燈買來,懷舊的意義應該大於使用的實際性吧。
|
新進會員
|
tagar兄, 我是打算來玩, 但看來今年內都沒時間了... -_-; |
新進會員
|
如果NF-1接上420EX, 420EX會自動測輸出麼?? 還是一定要用EOS機身的TTL測??
謝... |
新進會員
|
如果NF-1接上420EX, 420EX會自動測輸出麼??---???
Can I use 420EX on New F1 & T90? Also can I adapt a FD len (Not New FD len) on New F1 & T90? Thanks. |
新進會員
|
>如果NF-1接上420EX, 420EX會自動測輸出麼??
No for NF-1. But T90 with manual apeture and shutter setting with 420EX will give you ordinary TTL Flash auto exposure.
>Can I use 420EX on New F1 & T90? yes, but only manul flash with New F1. For T90, see the above answer.
>Also can I adapt a FD len (Not New FD len) on New F1 & T90? Yes.
|
新進會員
|
tagar兄 奇摩上再賣WINDER A2的是你嗎? 我想跟你議價ㄟ 可是不知道你的E-MAIL :P 我的E-MAIL是: m9122632@student.nsysu.edu.tw |
新進會員
|
對不起 我用到注音了 ㄟ=耶...SORRY
|