網路會員
|
這是在測試小白IS啦。 5D的ISO拉到400是一個等級,400到800是另一個等級,800以上的雜訊才比較明顯。 |
網路會員
|
http://www.clwu.idv.tw/~clwu/depth.php 中文景深計算。 http://www.wrotniak.net/photo/tech/dof.html 英文景深解說。 http://kotomka.info/dof/dof-en.html 英文景深計算。 135機 100mm f2.8 = 4/3機 50mm f1.4 由中文景深計算 算出來的答案,吳差值為 0.01。 這個是外國的景深計算機,算出來,大家請看一下。 公式: Computing depth of field The near and far distance values defining the limits of acceptable sharpness can be calculated as d1,2 = d /(1±ac(d–f)/f^2) [1] with plus in the denominator used for the near (d1), and minus — for the far (d2) value. The notation is: d1 or d2 — the minimum or maximum subject distance in acceptable focus (measured from the lens, or, more exactly, from its front cardinal point, see below) d — the focused subject distance f — lens focal length a — aperture (or F-number) value, e.g., 2.8 c — the diameter of the acceptable circle of confusion. You may like more the same formula re-shuffled to a slightly different form, proving exactly the same results: d1,2 = hd /(h±(d–f) ) [2] where h = f2/ac is close (but not equal) to the hyperfocal distance, described in a section that follows. Negative results for the far limit (i.e., with a ''–'' in the denominator) mean that it reaches the infinity. Remember that all lengths have to be expressed in the same units (whatever they are: millimeters, inches, or nautical miles). Instead of using the above formula to compute di, some people prefer to compute the absolute value of Δdi = |d–di|. It can be computed from this definition, or from another, equivalent, form: Δd1, 2 = d /(h/(d–f)±1 ) [3] In other words, if your camera is focused at d, acceptable circle of confusion will be achieved for subjects ranging in distance from d1 to d2, or from d–Δd1 to d+Δd2. The value of c should be set to the 1/1440 of the frame diagonal: for example, 0.03 mm for 35 mm cameras, 0.0061 mm for ones with 1.8" sensors (Olympus C-series from C-2000Z to C-7070WZ) 0.0077 mm for 2/3" ones (E-10/E-20), or 0.015 mm for the Four Thirds system, and so forth. As mentioned above, you may use another fraction, like 1/2000 or 1/1000, as long as you know what are the implications, and if you use the same value for all comparisons. lee2028修改於2007年03月25日10:15 lee2028修改於2007年03月25日10:16 lee2028修改於2007年03月25日10:27 推薦者: sennon |
網路會員
|
不過就個人粗淺的觀念裏,任何鏡頭無論是使用在x1.5 x1.6 x1.7 x2 ........xN的APS機身上,其實它還是原來的焦距(攝角)不變.只因CCD或CMOS片幅的變小,形同格放而已,因此其景深仍舊是不變的. ======================================================================== 攝角是不同的.
就如同使用一顆120(6x6)的80mm鏡頭,經轉接環把它裝在135機身上拍,其在底片上的成像與景深和在120(6x6)底片是一樣的大小.但80mm鏡頭在135相機使用時,它是小長鏡,而在120(6x6)卻只是標準鏡而已. ======================================================================== 135機身上和在120(6x6)底片上成像與景深是不同的,因為攝角是不同的.
同理,一顆50mm鏡頭在135和120(6x6)底片上的成像是一樣大小的,但在135稱為標準鏡,在120(6x6)就稱為廣角鏡了. ======================================================================== 在135稱為標準鏡,在120(6x6)就稱為廣角鏡了,所以攝角是不同的,才會有標準鏡與廣角鏡之差異. 由最後這個不同推翻前面兩個論點.
|
網路會員
| |
部落格(8) 論壇版主
| |
部落格(8) 論壇版主
| |
部落格(8) 論壇版主
| |
網路會員
|
原發文者: 魯獅 發文時間: 2007/03/25 22:43 當全幅數位機和APS數位機使用同一焦距鏡頭拍照,使用相同光圈時,雖然APS相機因感光元件面積小而攝角變大,相..(恕刪)
-請在此輸入回應- 以上假設導出以下是否應為真!? 135 的 36mm x 24mm 只是 6x6 的格放,使用同一焦距鏡頭拍照,使用相同光圈時,......景深一樣! 還有 [APS相機因感光元件面積小而攝角變大] 不對,應該攝角變小. clwu修改於2007年03月25日23:01 |
部落格(8) 論壇版主
| |
部落格(8) 論壇版主
| |
網路會員
|
原發文者: 魯獅 發文時間: 2007/03/25 23:02 光圈是用來控制景深的,相同焦距鏡頭,相同光圈,無論是120,135全幅或APS,理論上景深是一樣的. http://blo..(恕刪) -請在此輸入回應- 這是錯的. |
網路會員
|
原發文者: 魯獅 發文時間: 2007/03/25 23:04 是的!更正為 當全幅數位機和APS數位機使用同一焦距鏡頭拍照,使用相同光圈時,雖然APS相機因感光元件面積小..(恕刪)
-請在此輸入回應- 感光面積不同,景深就會不一樣,所以... |
部落格(8) 論壇版主
| |
部落格(8) 論壇版主
| |
網路會員
|
原發文者: 魯獅 發文時間: 2007/03/25 23:12 "光圈是用來控制景深的,相同焦距鏡頭,相同光圈,無論是120,135全幅或APS,理論上景深是一樣的" 當然還要看各..(恕刪)
-請在此輸入回應- 計算景深須要有 COC 值,而 COC 值一般常見 COC 在 0.025 ~ 0.033 之間. 而這個 0.025 ~ 0.033 值為 36mm x 24mm 的 COC 值. 而 APS 或 6x6, 6x45 ... 這些相機的底片或感光面機的對角線與 36mm x 24mm 的對角線比值(36mm x 24mm 的對角線 / 這些相機的底片或感光面機的對角線),就是一般 x1.5,x1.6,x1.7(sigma),x2.0 的焦段比. 而如果 36mm x 24mm 的 COC 值為 0.03, 那麼 0.03 / 1.5 既為這些 x1.5 焦段比的 COC 值, 而 CANON 既為 0.03 / 1.6, SIGMA 為 0.03 / 1.7 ..... 所以因 COC 值不同,代入景深計算後所得到的數據會不同. clwu修改於2007年03月25日23:29 |
網路會員
|
原發文者: 魯獅 發文時間: 2007/03/25 23:16 "感光面積不同,景深就會不一樣,所以..." 我的意思是站在同一位置,使用相同焦距鏡頭,使用相同光圈在全幅和A..(恕刪)
-請在此輸入回應- 如果用一個極端一點的來比! 用 DC 與 APS 或 DC 與 135 來比,這樣會有什麼結果. DC 只是 CCD 比 APS 小一些而以啊..... |
部落格(8) 論壇版主
| |
網路會員
|
各位冷靜一點,好像都離題了.....,趕快回來吧// |
網路會員
| |
部落格(8) 論壇版主
| |