網路會員
|
Much much thanks, 香港至*NET*超人!!!
By the way, do you have any suggestions on magnesium alloy ball head which is lighter and strong enough to attach "reasonable" weight (say, 3Kg to 3Kg)?
Thanks again!!
================== Note: I"ll use it to support a F4s + 80-200F2.8 + flash, and may need vertical framing. |
網路會員
|
Sorry, typo
The weight range should be 3Kg to 5Kg.
|
網路會員
|
no lightweight ballhead which really support 5Kg well. the minimum you need to pay for is the Foba Mini Superball, around 600g.
|
網路會員
|
本人正有一MANFROTTO 190+056 3D頭連原廠脊帶在放盤,可承受約3KG,可平讓給你,有興趣可E-MAIL給我LTK419@NETVIGATOR.COM |
論壇版主
|
3asv71 你不如先買只好小小的單腳... |
網路會員
|
單腳我都有諗住買,不過就真係少用,係去睇concert先可能會用到,而年中都無幾何去睇concert..
另外尋日去x祥睇過支190Pro,要$720,個價係咪差唔多?拎上手都幾重幾墜手下,不過我諗都應該會幾穩陣,但始終唔知配咩頭好,同場見到有M記幾ball head平既都係$300幾至500左右,加埋$1000鬆d就有交易(可能有地方再平d),但就係唔知耐唔耐用.... |
網路會員
|
Thanks 香港至*NET*超人,
Foba Mini Superball is very good but someone told me that it is a very expensive ball head (around HK$1.3K to $1.4K.)
Mine is using Manfroto 308RC ball head but it is a very heavy model which weighs down my mood to carry tripod frequently. |
網路會員
|
Got Velbon PH-273 if you really need lightweight and forgive its pretty mid-lo stability. Foba is expansive, but it worth!
|
網路會員
|
伍佰元可買到鴨記的仿190大陸脚架連波頭,但不很耐用。 |
網路會員
|
I do not recommend offset ballheads simply because they aren"t very comfortable to use in vertical position. There are far better ballheads to choose from. |
網路會員
|
Another factor you have to consider is whether you want to have quick release on the tripod head. Foba, like many other higher end ballhead uses the arca-swiss QR system which is excellent and adoption would probably provide a path for you to upgrade if ever intended. However, like everying else they are quite expensive dollarwise. http://www.kirkphoto.comhttp://www.reallyrightstuff.comIf Foba mini is too heavy, consider acratech http://www.acratech.net |
網路會員
|
Thanks very much, 香港至*NET*超人, wlachan and hytong,
I will go TST and MK today to get some ideas on those ball heads from various brand, e.g., Foba, Gitzo, Manfrotto, Velbon, etc.. Till now, it is still a searching stage because the acquisition would cost over HK$1K or something. If decision is being made wrong (at least under my point of view), it wound be another reducdant item in my photo gears. From years to years, I"ve "wasted" considerable of money on photography and eventually, I"ll be "killed" by my wife.
Just kidding.
Almost indisputably, photography is a "money oriented" activity.
|
網路會員
|
伍佰元真的太少了 看來只好選國貨.. |
網路會員
|
攝影不貴, 玩HIFI及車, 更敗家.... 買FOBA/ARCA SWISS是絕不會錯, 問題是是否合需要而已.
|
網路會員
|
>From years to years, I"ve "wasted" considerable of money on photography
The truth is, a cheap (on quality) piece of hardware is an expensive buy in the long run, because you will keep upgrading and ended up with a whole bunch of useless stuffs. Save the money and buy the right piece of equipment. That way you will save $$$ for many years to come. |
網路會員
|
>>>>攝影不貴, 玩HIFI及車, 更敗家....
高見。高見。超人,也是大玩友。
三幾萬,五六萬,去玩影相,已經可以買一套不錯的攝影器材。問題是你有無心去拍。天天想著要升級...錢才要多花。。
玩多幾樣東西後,你就知攝影所花的金錢相對有限。
能拍出一張好照片。所花的時間比金錢還要多。要時間去浸..... |
網路會員
|
"能拍出一張好照片。所花的時間比金錢還要多。要時間去浸....."
Totally agree.
自問影佐幾年相,無一張合眼! |
網路會員
|
因著眼高手低問題, 好多有心研究攝影的人, 因為睇得太多書太多展覽, 結果吋步難移, 迷失自我.
|
網路會員
|
超人兄:
我也有jsklee的問題, 可能問題更大...
未知可否提供解方法.
註: 因工作關係, 每星期只可花1-2天在攝影. 而主要也是家庭生活相(女兒的相). |
網路會員
|
Kelvinwong:
I think you will be very very happy when you see your current photos, no matter how it looks now. |