Gerxin

網路會員

2004/08/28 09:27 請先登入後才可回應

器材: 其他其他

Is there any simple & fast method to correct a scan file from film with satisfy output ?
(Of course I believe that satisfy doesn"t mean perfect, what I ask for is just like the auto-focus. One click to give a 98% close focus, but not perfect)

Recently I want to buy a film scanner to change my film to digital file.
I have tried the flatbed epson 1670, colour not good and burst.
I have tried epson 4780, better colour & sharper, but expensive.
Dual IV $2200, sounds good, but not tried yet.

I understand that even using a very good scanner, the image has to be toned to give a better quaility picture. Many people say that the scanning time is not long compare to the toning and adjustment time.

So I would like to ask is there any fast method to give a near perfect/optimal result?

*香港至NET超人* 網路會員	1) 2004/08/28 10:17 用FILM SCANNER, 由擺平到存檔, 平均都要2分鐘一張, 唔算快.
jsklee 網路會員	2) 2004/08/28 10:20 Money buy time. If you have sufficient budget, you could buy what you want.
jsklee 網路會員	3) 2004/08/28 10:20 say Nikon 8000/9000ED.
Gerxin 網路會員	4) 2004/08/28 11:55 jsklee, Do you mean that a higher quality scanner can largely reduce the time of colour correction? Then how"s Dual 4 performance?
gigakpt 網路會員	5) 2004/08/28 12:32 仲要用3rd party scanner software先較好 e.g. Vuescan, Silverfast....等等因原廠個D software，好多都寫得麻麻我用Nikon LS-30，因為試過Vuescan，已經無用原廠個Nikon Scan 無論顏色還原、速度都有改善，不妨試試
jsklee 網路會員	6) 2004/08/28 12:56 "Do you mean that a higher quality scanner can largely reduce the time of colour correction?" usually the case.
jsklee 網路會員	7) 2004/08/28 12:57 "我用Nikon LS-30，因為試過Vuescan，已經無用原廠個Nikon Scan 無論顏色還原、速度都有改善，不妨試試" I am using 4000Ed. Could I use vuescan?
jsklee 網路會員	8) 2004/08/28 12:59 http://www.hamrick.com/ I found the answer.
zerozero 網路會員	9) 2004/08/29 00:43 Nikon Sacn 4.0 is easy to use!! Jsklee, are you using 3.0?
Peter LO 網路會員	10) 2004/08/29 11:35 又要快又要好？DSLR + film duplication kit。
Gerxin 網路會員	11) 2004/08/29 12:15 DSLR + film duplication kit? Can you explain a little bit more ar? Is it just like the people duplicate the film to film by 1X lens, but this time use digital camera and 1.6X or 1.5X lens ar?
*香港至NET超人* 網路會員	12) 2004/08/29 12:23 差不多, 用DC或DSLR翻拍菲林, 要MACRO鏡及燈箱. 不過DC及DSLR的D-RANGE唔夠FILM SCANNER大, 高光及暗位細節容易損失, 但就可以做到幾秒一張.
Peter LO 網路會員	13) 2004/08/29 12:38 係呀，就係超人所講的方法。 DSLR/film scanner各有各辣啦，前者如超人所講，D-range較小，但由於每個CCD單元只負責一個（或因downsizing而不足一個）像素，不會像film scanner般因每個單元負責一行影像而造成的條形雜訊。你的菲林多嗎？太多的話比錢人搞算啦。
Gerxin 網路會員	14) 2004/08/29 13:08 I have around 100 roll la! I know there are some shops have film scan service of $20 a roll. But many of them give low resolution bor
jsklee 網路會員	15) 2004/08/29 16:00 $20 a roll? yes, the resolution is very poor.
G.O.B. 網路會員	16) 2004/08/29 16:03 買個二手底掃, 用完即賣, 除時仲可搵返少少架!
jsklee 網路會員	17) 2004/08/29 16:13 zerozero: I am using 3.1
gigakpt 網路會員	18) 2004/08/29 16:41 jsklee:你部4000ED可以用Nikon Scan 4.0 Nikon Scan 3.X 最新係3.12 Nikon Scan 4.x 最新係4.02 Nikon Scan 4.0: http://www.nikon-asia.com/downloadfile.php?mode=download&fileid=27 Nikon Scan 4.02 update: http://www.nikonusa.com/software/NS402_up.zip
jsklee 網路會員	19) 2004/08/29 16:47 I should download all two links, right?
jsklee 網路會員	20) 2004/08/29 16:51 Nikon Scan 4.0 is better than Vuescan?