網路會員
|
自問自答 http://www.wrotniak.net/photo/c5050/_oly/fdl-02.jpgThe FDL-02 LCD monitor hood. This one is different than that intended for the "5050, and the chances of ever seeing it in the States are rather slim. The third-party alternatives available on the market do not look very useful. While I haven"t had any experience with these two accessories, here is what Chris Brennan (thanks!) wrote me about the FDL-02 hood: I was able to get the FLD-02 LCD hood from an acquaintance in Japan. While I do like it better than any other "3rd party" hoods I"ve seen on the market, it requires the attachment of a self-stick frame on the LCD itself which prevents the LCD screen from being turned inward (and protected). It does come with a snap-on cover which you can use when the hood is not on the camera to protect the LCD whilst carrying. Also, by having the frame on the LCD, it prevents you from using the camera in the PT-020 underwater housing - the clearances are way too tight! Nonetheless, the hood is of great help while composing in bright sunshine. I wish Olympus would sell it in the US. |
網路會員
| |
網路會員
|
昨晚回家把E-1拿出來檢查了一下，
果然，
是我之前在選單中，
將"邊角補償"與"雜訊抑制"開啟，
造成儲存JPEG時速度緩慢…
但是好奇的是在RAW時，
完全不受因我開啟這兩項設定影響，
速度幾乎一樣!!
(當開啟"減噪"時，RAW明顯變慢!!)
故我很好奇是否用RAW檔時，
E-1其實並無處理太多的後製??
(含銳利度、對比、飽和度等)
而是透過VIEWER/STUDIO來處理，
進而造成VIEWER/STUDIO處理圖檔時速度的緩慢??
若是如此的話，
用CS解檔的話自然效果不及VIEWER/STUDIO了!!
不知我的想法對否??
也許各位可以問Olympus看看囉~
^^
|
網路會員
|
>>For professional printing and commercial applications that require >>high-level post-processing,totally unprocessed image data can be >>saved in RAW data format.
>>Olympus Viewer can edit various properties of an image,
>>allowing you to do a virtual re-shoot of the photo.
>>Botch your white balance setting?
>>With RAW format, you can adjust it in software, with no loss in >>quality. You can also adjust saturation, contrast, sharpness, and >>the color space. You can turn the noise filter on and off as well.
|
網路會員
|
這就可以解釋海野和男先生 在設定上只提高銳利度 而直接以JPEG(SHQ)存檔
感覺像是拍底片機吧 |
網路會員
|
>>>>>>>>>
但是好奇的是在RAW時，
完全不受因我開啟這兩項設定影響，
速度幾乎一樣!!
(當開啟"減噪"時，RAW明顯變慢!!)
故我很好奇是否用RAW檔時，
E-1其實並無處理太多的後製??
>>>>>>>>>>
沒錯，RAW檔的精神就在原汁原味，專業使用者拿到RAW後，可以依自己想要的方式料理RAW檔(曝光,銳利度,對比,....)，這就像拿到底片後，還能在放相階段去調整(JPG/TIF也是可以調整，但是跟RAW檔相比，就少了不少原始資訊)
尤其Olympus Studio裡，簡直把E-1的RAW檔後製那部分功能做到PC軟體上...
這也是我之前提到，Olympus企圖建立Digital Workflow Porcess的重點吧
|
網路會員
| |
網路會員
| |
網路會員
|
原來E-1的電池把手還間有垂直把手功能，難怪之前看圖片還覺得奇怪
Amongst the many accessories available for the E-1 is the HLD-2, a grip that not only offers a long lasting battery, but replicates some controls. The HLD-2 provides a vertical shutter release, a secondary set of dials (Main and Sub), and both an AEL button and an AF Frame selection button. A detail worth noting, the use of the grip requires that the cover door for the battery compartment be removed. In a piece of brilliant design, the door can be securely attached to the grip, on the side that faces the base of the camera. Kudos. |
網路會員
|
Number5兄
如有 E-1 用L-Plate，小弟會很需要的。
|
網路會員
|
Number5兄,
用0.8mm不鏽鋼板雷射切割折彎製作再焊接螺絲帽,或是以鋁材以工作母機切削加工都可以做. |
網路會員
| |
網路會員
| |
網路會員
|
請問各位:
因為我託我同事在香港幫我買ZD 50-200mm，
但依之前網友提供的資料，
在好世界有買到!!
可是我同事去問無貨??
請問還有哪家價格合理又有貨的呢??
我同事還問到要賣HK$ 8100!!
> <
謝謝各位了!! |
網路會員
|
cafekid1025兄:
我上次是在好世界買的,如果沒有妳可以到尖沙嘴站那裡也很多呀!
不過它們價格都很便宜我反而不敢買 |
網路會員
| |
網路會員
|
cafekid1025兄
香港怎麼買都比台灣便宜太多，昨天逛了一下台北博愛路，E1+14-54一般都在90000-92000間，而50-200一般在38000-39000間，超貴的。
台灣的價格打72折，就差不多是香港或大陸的價格。 |
網路會員
|
流浪在蘇州兄
請收信唷!! |
網路會員
|
真是好便宜.....只能問到七萬五的.... |
網路會員
|
遮騰了一個月
總算把閃光燈換回來了~ |
