新進會員
|
P與Program不是同一個東西嗎?可是為何要分開顯示ㄋ 不懂阿!有誰可以解釋?
|
新進會員
|
通常program 會有hi 和low兩段 讓user在快門速度上 做點區隔 可是這兩個好像差不多唉 |
新進會員
|
哪裡跟哪裡分開顯示啊? |
新進會員
|
P與Program分開顯示阿
|
新進會員
|
就是有 av tv p program m bulb 五段選擇啊 可是 p和program 在快門的選擇上卻又差不多 |
新進會員
|
在p的設定上轉動轉盤會出現p-1p-2p-3上面有Tele及wide 又是啥意義? |
新進會員
|
睡搞搞去了 jun65明天看過eos10後 記得告訴我們 |
新進會員
|
在p的設定上轉動轉盤會出現p-1p-2p-3上面有Tele及wide 又是啥意義?
那就是我說的 可以依使用鏡頭的長短 來選擇p的等級 那program在運作時就會自動限制快門的安全速度來配合你所使用的鏡頭 |
新進會員
|
真的要去睡了 掰掰 |
新進會員
|
在p的設定上轉動轉盤會出現p-1p-2p-3上面有Tele及wide →→Tele是長鏡時的選擇,相機會選擇叫高速的快門,wide是廣角鏡的選擇,快門速度的範圍會比較大,你可以仔細地試試看P1,P2,P3的差別在哪裡 |
新進會員
|
>T90拍夜景-----應該和一般相機一樣吧 B快門加快門線60T3,我好像回答的很白痴哦。至於包圍曝光.....
T90 have no automatic 包圍曝光 |
新進會員
|
總算恢復啦
mickey_mouse兄 T90真的沒有包圍曝光哦 那這safety shift 是啥
jun65兄 那時候回來啊下禮拜我要去金門啦 你NF1還要不要啊 |
新進會員
|
明天下午偶就會回台北,tagar兄,您要怎麼聯絡啊! |
新進會員
|
我的電話 0932681768 我姓馬 你埔里拍妥啦..... |
新進會員
|
safety shift is active when you select a not-suitable apeture or shutter speed.
With safery shift on with Av mode. if you choose f1.4 (or any apeture) on a very bright situation that even 1/4000s cannot give you correct exposure, the camera will help you to chose a smaller apeture. If you choose F8 (or any other apeture) even 30s cannot give you coorect exposure, the camera will help you to choose an apeture to prevent underexposure.
similarly if safety shift on with Tv mode, the camera may overrive your shutter selection if necessary.
it is noththing to do with 包圍曝光 |
新進會員
|
果真就是像是他名字一樣 安全偏移...... mickey_mouse兄 謝啦 |
新進會員
|
請問一下各位前輩有沒有人使用過 或是聽說過 一台機子 vivitar v2000 呢 如果有的話 可不可以告訴我相關的資訊呢 像是測光的模式 還有一些功能阿0_0 另外 vivitar 機身使用的鏡頭還有公司在作嘛? 拜託了~___~ |
新進會員
| |
新進會員
|
to bjbruce:
Your camera is getting light leak. You can ask photo lab to give your some empty film cartridges, Break those cartridges and use those black "cloth" to amend the camera body.
|
新進會員
|
之前有在雷虎看過類似的照片,是漏光造成的..... 所以我也覺得是這樣的問題...應該不難解決的.... |