網路會員
|
P4 3.2G 雙通道 1G DDR NC4.2跑D2X RAW竟然跑不動,加到2G 勉強可以 |
網路會員
|
jer8888兄買的是公司貨嗎?
|
網路會員
| |
網路會員
|
jer8888兄買的是公司貨嗎? 剛降價的國祥公司貨,$150000 |
網路會員
|
哇...國祥這次是怎拉,165000.-,直落到150000.- 看來他們的壓力也不小
(台中明昌.149000.-) |
網路會員
|
kuankuoyun2002兄:
請教Andrew Raszevski這組曲線有提供download嗎? |
網路會員
|
國祥降價賣NT$150,000, 我看水貨NT$127,500也不會維持太久, 哈哈~~ 再等等.... |
網路會員
|
用了D2X後,周邊又花不少錢,記憶卡4G兩片,電腦全換成2G RAM才跑的動D2X NEF檔,筆記型還在想辦法,之前1G跑D2H及D70的NEF檔很快,換成D2X跑完兩張就不行了,有要用D2X的要有心理準備$$$$ |
網路會員
|
Jenhoxen大大: Andrew Raszevski有提供給大家download,綱址就在文章內 I always use custom curves. You can download the custom curve here: http://nikonimages.ownmail.net/Images/060606.ntc It’s a “.ntc” file, which seems to be incompatible with some past versions of Capture. Obviously Capture needs to be incorporated in your work flow to achieve the desired result. Most other raw converters ignore custom curve instructions saved in the file data. This curve will make the camera behave as though it has an extra stop of sensitivity so if you’re inclined to use the auto modes like aperture/shutter priority or program and you’re using matrix metering then set the EV at -1.0. All the other info you need is in the EXIF of the file in this post.這句要特別注意. Using this set-up should be as easy as pointing the camera at anything you like and pressing the button. It should take advantage of the full dynamic range of the cam, so if your histogram is clipped at either end then the subject luminance ratio exceeded the sensors specifications. I set-up a D70 in a similar way; here’s a shot from someone who has no idea how to use a digital camera. If you look at the histogram you’ll see that it looks nearly perfect despite the fact that it was taken under very contrasty lighting. Image control: Zoom out | Zoom 100% | Zoom in | Expand / Contract | New window Good Luck. Have fun. http://forums.dpreview.com/forums/read.asp?forum=1021&message=13853799 |
網路會員
|
感謝kuankuoyun2002兄!
已download下來test,不過看來並不適於一般室內打閃燈的記錄照,棚拍也不對→也許就適合他那個戶外陽光吧^^ |
網路會員
|
D2X公司貨降價 或許是買氣佳 而國祥不想錯失商機 步入D2H當初賣沒幾台的窘境 |
網路會員
|
小弟也加入了,愉快的使用中,不知大大們能不能分享一下對焦的設定,讓它快又準 |
網路會員
|
新生報到! 入手第一天隨便在家拍了老婆幾張,拍完後用LCD review放大來看,哇靠,老婆的毛孔一清二楚,害我被罵,他說我可以用這台去當作百貨公司化妝品專櫃拍皮膚毛孔的那種相機(或顯微鏡)了!
|
網路會員
|
jenhoxen 兄 請問D2H可否調動態範圍? 實在很不習慣白色的地方沒有細節,是不是有那地方需要設定嗎? |
網路會員
|
to keithhwang 插個話,D2H是比較不怕過曝的,若是用RAW格式,高光部分應仍有細節。 我的設定都是選None 要不就是 Normal,事後再視需要進行調整。 |
網路會員
|
感謝回答! 就是因為高光部份的細節不是很令人滿意,所以才會有此一問,想說會不會因為某些設定沒有弄好,看起來好像也沒有特別的設定 |
網路會員
|
keithhwang兄:
抱歉今天下午比較忙!
正想請教你S3可以調動態範圍嗎?在D2H上我從沒發覺有特別設這一項,我想是否可以透過自訂曲線來達到目的?如果想要白色部分多保留一些細節,可以用下凹的曲線→但拍出來不都是黑乎乎的?或直接under一點就有白色細節了。
不過D2H的暗部雜訊高,其實不能用D100的想法:先under再push細節出來,它最好還是照表操課,或略加1/3EV比較漂亮;至於over掉的地方,只好算了→"D2H不怕過曝"之說,其精祌主要在曝光不要特別去under,並不是說over了的部分還有隱藏訊號可供還原。
以上是我的了解。 |
網路會員
|
jenhoxen:
你的d2x大致上搞定了吧......
上次的 raw 檔 的確有些不好搞定,甚至懷疑閃燈出力 不過我大概朝色相彩度濃度的方向去抓 初步有些方向了 你希望調到什麼樣的結果呢?我試試看 只是這一陣子較無心思來測試這個 大概下星期吧... |
部落格(36) 藝廊版主
|
TO:weimiyu
南部低兔叉粉多人使用喔! 包含小弟我、仔仔、古馳還有之前發言的houmeng 我們皆是業餘玩家
|
網路會員
|
真的嗎?高雄可能還較多,屏東目前還沒看到,到是有d1x啦,很高興認識您們 |