回論壇首頁
論壇主選單 > 器材版 > Nikon 發表Nikon Capture NX
作者  
討論話題
 

kuankuoyun2002


網路會員

2006/02/21 18:52
器材: Nikon 尼康 D200最新拍賣藝廊作品D200規格表

NEFとは、撮像素子から得られた12ビットRAWデータと、撮影環境情報や画像処理・ 調整情報を1ファイルで扱うニコン独自のファイル形式です。NEFファイルとして保存 した画像に様々な調整を加えても、撮影環境情報に画像処理・調整情報が書き加えら れるだけで、オリジナルデータの画質を劣化させたり、損なったりすることはありません。 NEFファイルは撮影時におけるRAWデータの保存形式であるとともに、TIFF、JPEGに ついては、ファイル形式を維持したままNEFで保存できます。



ステップ1
選択した画像を開く


ラベル付け、ソート、編集など高度な機能を提供するブラウザーを使用して、処理や調整を加えたい画像を選択し、開きます。
   

ステップ2
現像する感覚でRAW調整


NEFファイルの特性を活かし、撮影後のRAWデータを現像して、画像処理・調整を加えていきます。撮影情報パレットを開き、必要に応じて撮影時にカメラで行った設定を調整してください。
   

ステップ3
ダイナミックレンジと色かぶりの調整


ブラック、ホワイトおよびニュートラルコントロールポイントを用いて、画像全体のダイナミックレンジと色味の調整を行います。画像上に直接コントロールポイントを置いて作業を行うため、より直感的な調整ができます。
   

 
ステップ4
画像の調整


画像全体の明るさ、コントラスト、彩度、カラーバランスなどの調整を行います。
   

 
ステップ5
選択範囲の階調と色の調整


次に、部分的な調整を行います。調整を加えたい部分にカラーコントロールポイントを置くだけで簡単に調整ができます。これまでのような複雑な選択作業は一切不要です。


 
ステップ6
選択ツールを使っての調整


選択ブラシ、なげなわツール、多角形選択ツール、選択範囲グラデーションツールなどを用いて、ディテールの調整を行います。Capture NXは25種類以上の編集オプションを用意しています。
   

ステップ7
切り抜きとサイズ変更


画像のサイズや解像度を変更した後、切り抜きや縦横比の変更を行います。
   

 
ステップ8
輪郭強調と印刷


アンシャープマスク機能を用いてエッジのコントラストを高めます。Capture NXではカラーマネージメント機能が充実しているので、プリンターとのカラーマッチングも容易に設定できます。
   

http://www.nikon-image.com/jpn/products/software/capturenx/features.htm
推薦者: 泰勒, cyw

jenhoxen


網路會員

181) 2006/08/13 03:59 
請問那位知道:NX工作畫面右上角那個「鳥瞰鏡頭」視窗,在「瀏覽器」畫面時怎麼讓它出現【調整大小】的功能啊?(調整瀏覽器內一小格一小格索引畫面的大小)

之前第一次裝NX時,鳥瞰鏡頭在瀏覽器打開時,會出現一些灰色方塊,左邊有1~5的級數,把三角形拉上或拉下就可改變格子的大小;重裝之後這功能就不見了,「鳥瞰鏡頭」在「瀏覽器」畫面打開,裡面是空的沒有功能。又重裝了NX仍沒有作用!

當然,還可用Ctrl +/-控制大小,但總希望那功能可用!感謝!

jenhoxen


網路會員

182) 2006/08/13 04:10 
哈~找到了→在「瀏覽器」畫面打開後,視窗右上方那些file夾最左邊那個,點進去最下方一個「檢視」,預設是「列」,改為「光台」就行啦!之前也是摸出來的,但隨後就忘了,sorry!

kuankuoyun2002


網路會員

183) 2006/09/01 18:42 

kuankuoyun2002


網路會員

184) 2006/09/03 08:25 
Capture NX v1.0.1 supports D80

Nikon has released a new version of Capture NX to support the D80
--
ToeKnee44 (aka Tony)

http://forums.dpreview.com/forums/read.asp?forum=1034&message=19858167

kuankuoyun2002


網路會員

185) 2006/09/03 08:33 
Re: Capture NX and Raw conversion

Richard D Jacobs wrote:
> I have anumber of Raw images edited in NX and saved as NEF file.
> How do I convert these files into JPEG's.? I opened the NEF files
> and selected save as JPEG and nothing happened. The files are still
> in NEF format.


In this circustance, the NEFs don't just disappear (and you wouldn't want them to). When you select to "Save As" JPEG, check to see where the files are being saved. Chances are, your files saved as JPEGs just fine, but perhaps not where you're looking for them ;-)

--
John Walker
http://forums.dpreview.com/forums/read.asp?forum=1034&message=19854100

Multiple Images

Hi,


I had this issue for saving multiple images as JPEG copies. See my thoughts on X at:

http://forums.dpreview.com/forums/read.asp?forum=1034&message=19782990


I have not found a way in NX to process multiple images differently (as distinct from batch processing them in the same way), which NC4 can do, or to copy and resize multiple images as JPEGs, which NV6 can do. Serious omissions for me.

--
Jon
http://forums.dpreview.com/forums/read.asp?forum=1034&message=19854237

Re: Capture NX and Raw conversion

Richard D Jacobs wrote:
> Thank you all for your replies. I am able to convert to JPEG's in
> Nikon View but not in NX. Any other suggestions?
> Thanks
> Rich

From the Capture NX menu, choose File ~ Open Folder in Browser
In the browser, select the photos you want to save as JPEG
From the menu, select File ~ Save As. . .

Click "Browse" button to set the destination directory (i.e., where you want the new JPEGs saved)

Choose whether or not you wish to keep the file name of the NEF or create some new format

Select file format "JPG"
Choose "Excellent Quality" (or whatever you want)

Click "Notify when completed" if you want to get a pop-up box when the batch is done

Click "Start" button

--
John Walker
http://forums.dpreview.com/forums/read.asp?forum=1034&message=19854517

Re: Capture NX and Raw conversion

Thanks again John, it worked.

I've been shooting JPEG's 99% of the time until I purchased NX. I notice when I compare the converted JPEG file to Raw on the computer it looks the same in NX but different in Nikon View. Any explanation?

Richard
http://forums.dpreview.com/forums/read.asp?forum=1034&message=19855101

kuankuoyun2002


網路會員

186) 2006/09/03 08:37 
Nikon Capture NX updated to v1.0.1

Apologies if this has already been posted.


http://www.robgalbraith.com/bins/index.asp

http://forums.dpreview.com/forums/read.asp?forum=1034&message=19853015

Re: Nikon Capture NX updated to v1.0.1
You need this version if you want to be able to open and manipulate NEF files from Nikon D80. This is the only software - so far - that recognizes D80's NEF files.

Happy shooting!

--
George

http://forums.dpreview.com/forums/read.asp?forum=1034&message=19853072

Re: Nikon Capture NX updated to v1.0.1

George Czajkowski wrote:
> You need this version if you want to be able to open and manipulate
> NEF files from Nikon D80. This is the only software - so far - that
> recognizes D80's NEF files.

Plus Silkypix:
http://www.isl.co.jp/SILKYPIX/english/products/


(In fact, I just opened and converted a D80 NEF with an earlier version of Silkypix - after telling me it doesn't support it, it opened it anyway! I assume it made an "intelligent guess").

http://forums.dpreview.com/forums/read.asp?forum=1034&message=19853572

kuankuoyun2002


網路會員

187) 2006/09/03 09:03 

kuankuoyun2002


網路會員

188) 2006/09/03 10:37 
Re: Capture NX 1.0.1

bmclaren wrote:
> I believe that you will need Nikon Capture NX Update which Nikon
> has just released. Apparently only software which will read D80
> NEF's

Plus Silkypix.

http://forums.dpreview.com/forums/read.asp?forum=1034&message=19853679

Re: Capture NX 1.0.1

bmclaren wrote:
> I believe that you will need Nikon Capture NX Update which Nikon
> has just released. Apparently only software which will read D80
> NEF's


I've just converted a D80.NEF with an OLD version of dcraw! (8.21) How did it do that? Guesswork!
bmclaren wrote:
> I believe that you will need Nikon Capture NX Update which Nikon
> has just released. Apparently only software which will read D80
> NEF's


I've just converted a D80.NEF with an OLD version of dcraw! (8.21) How did it do that? Guesswork!
bmclaren wrote:
> I believe that you will need Nikon Capture NX Update which Nikon
> has just released. Apparently only software which will read D80
> NEF's


I've just converted a D80.NEF with an OLD version of dcraw! (8.21) How did it do that? Guesswork!
http://forums.dpreview.com/forums/read.asp?forum=1034&message=19853806

kuankuoyun2002


網路會員

189) 2006/09/03 10:47 
These are updates in 1.0.1

Per the techsupport site of Nikon USA, these are the changes in 1.0.1 -

* D80 Raw files are supported
* Batch processes have been improved

* Browser menu, File Directory palette, Camera Settings palette and Control Points have been improved

* Print Layout Dialog has been improved
* Lasso & Marquee tools have been improved
* Edit List has been improved
* Options from the View menu have been improved

--
http://forums.dpreview.com/forums/read.asp?forum=1021&message=19839589

Batch seems to work OK now...
60 NEFs from D200 converted to 75% JPEG, and USM applied.
Took about 8 minutes, or 8 seconds per NEF.
(PC with Pentium 4 @ 3.4GHz, and 2GB RAM).

Batch always crashed before 30 NEFs before...



--
Take care,
Jorgen
http://forums.dpreview.com/forums/read.asp?forum=1021&message=19839778

mfchai

部落格(2)
網路會員

190) 2006/11/18 00:39 
Now is 15.96mb only
回上一層 第一頁   上一頁   第10頁 / 共10頁 到第 1 2 3 4 5 6 7 8 9 10
手札小舖熱門商品
史上最殺!★Canon 600D超值包★
【Nikon D4 / D800 完全活用】晉升Nikon專業旗艦必備寶典!
【Nikon D3200 完全活用】最佳入門手冊!
【2012攝影年鑑】★攝影家手札2012年度鉅獻正式登場!!
【Nikon 1完全活用解析】全新系統完全剖析!
攝影家手札數位影像坊DV哈燒網KeyBuy藝廊論壇
服務信箱:242204 新莊副都心郵局第12信箱 │ 會員服務部:02-85215082(上班時間早上9點~下午6點) 和平東路三段276號 │ 廣告專線:0937-887229 │ 總瀏覽1168097018人 │ 線上1535人
攝影家手札科技有限公司 版權所有 © 2017 PhotoSharp All Rights Reserved. 非經許可,請勿任意轉載、出版本站內容