新進會員
|
好少聽到有呢個問題喎, 有d其怪. 如果係壞左個快門制, 由於關係到換PARTS, 我估係外面D師父做係冇咩著數既. 幾錢就真係估唔到, 唔好意思.
|
新進會員
|
Sounds like the release button contact underneath is dirty or requires a new part. Should not be expensive if that"s the case. |
新進會員
|
Try to use WD-40 to spread a little o F65..... I do that on my shuttle button...well, is the on off switch..and it work fine... But if you think that"s too risky, go to Nikon service and have a look..:) |
新進會員
|
DON"T USE WD-40.IT will destory plastic!!!!! |
新進會員
|
可能係因為無電咋喎 |
新進會員
|
電子機用WD40 .... 好似... |
新進會員
|
似較適宜用乾性contact cleaner。油性contact cleaner/lubricant會令塑膠便脆,慎之。 |
新進會員
|
Geez... I wish I don"t have to say this, but it is a very very very poor advice (no offence to anyone) to suggest WD-40 which is a known camera killer. Don"t, and I mean DON"T use WD-40 for ANY camera or lens repair. There are proper products for such application, and WD-40 is not the one. I have been repairing some of my own gears for years and I hate to see such mistake be made. |
新進會員
|
>我的f65 快門釋放鈕反應十分遲鈍,要按很大力才有反應
還可以半按快門測光&對焦嗎?? |