新進會員
|
kikigloglo:
My AX never error. ^^
Be careful, 買停產機 in 天X. must be check it more careful~~ |
新進會員
|
It seems common knowledge that Contax SLR bodies aren"t that good. I am not a Contax user, but I quite like their designs. So what exactly are the problems with Contax SLR bodies? Electronic problems? |
部落格(1)
新進會員
|
我的nikon用了兩年快門鈕就出現問題（平時放在防超箱內），我十年前買的傻瓜，到現在還好好的，令我對ｎｉｋｏｎ留下一個唔好印像。
你們又如何****************************************
NIKON~
以tough,堅固出名,
我的機鏡不論二手一手多年來全無問題(早期無放防潮箱)
俾人點名話吾堅個陣時有d吾開心~
唉,呢個系統太堅,真係不滿. |
新進會員
|
大哥:
邊有相機唔會壞架!?
同埋,有時都好睇平時點用和保養...
另外,家陣中低檔的影音電子產品的QC都有點問題,好睇運氣!所以小弟好少買水貨啦!
PS:要耐用又襟操,不要買入門級body啦! |
新進會員
|
我用Dynax 5,最不滿就係冇直倒! |
新進會員
|
我的相機快門鈕就出現問題係鐵一般事實，"要耐用又襟操,不要買入門級body啦!"如果你告訴我入門機的壽命得兩年，我更加不滿 |
新進會員
|
wlachan:
Different models have different problem, hard to say, such as AX, the most of user think that AX cannot insert the film smoothly, always error, film loading not go ever u see that the LCD shows the first film no. and some user think the focus always out of order, it always not move in the back of camera. Moveover, they think the exposure meter is over 1 stop than normal. So, really difficult to say, some people no this problem, but some of my friends really got this shit, so, check the camera very carefully before buying, safe the mechine & save the money ^^ (sure, every camera will gone after their "mechine" life. |
新進會員
|
brother kcy_kwok,
My 167MT single/cont shoot select knob can not "kick" on its "S" position tighty and easy off-position to "C" position.
My AX focus accuracy NG, always show me a little-bit offset on the focusing screen. The last "AX" change back to Tin Cheong had halt-up problem. I got twice halt-up problem on my 1st roll of film, so I sent the gear back to TC. |
新進會員
|
nikonandcanon 大哥:
家陣新一代入門級的body,用料麻麻,輕漂漂咁;若果是勤力密密拍照,加上又用得粗,唔死就奇...不過,亦都可能是QC問題.
我以前有部CANON入門級EOS500N,都係咁上下,用得年多兩年,個快門制就鬆鬆地,聽聞快門葉還會漏油...@@!
好奇想知,你部F65機底打著那裏製造??
係喎,咁你有沒有拿部機比NIKON CHECK??收你幾銀呀??
會否打算升級去NIKON其他BODY?? |
新進會員
|
之前想緊買部NIKON AF BODY,都有考慮入門級的F65和F75;但拿上手後,我就立即放番低啦! 結果,買了部二手F70,真係硬淨好多,同埋又平又抵用。 ^^ |
新進會員
|
應該是啲相機品牌生產商張貨就價, 平價相機就QC 無咁嚴格和用平價質料.
所以很快便出現故障.
小弟以前買的Canon EOS-88 便是, 壞掉了. 早知當時比多些錢買台高一檔次的
比較好. |
新進會員
|
=> 其實最唔滿意是自己沒辦法搵多d錢去買自己的心頭好.
100% agree |
新進會員
|
brother kikigloglo,
Good luck. If still have problem in final, send to japan for check. Just send the camera to Kwun Tong and they will give it to japan (ever water good), They not charge any at first, after the checking, they will call u to say the problem & ask u wanna repair or not, sure, provide the price to u, if u don"t wanna repair, they just charge the fee for "transport"(a few hundred, not over 500, I forgot) NO ANY checking fee will be charge. If u choose to get it well, the repair fee will count but WITHOUT the "transport" fee. and the checking time is about 1 week or more. the Repair time is 1 month. For me, their sevice is really great, and give me some new catalog at last. ^^ |
新進會員
|
機底沒有印產地，只有 NIKON CORP.,JAPAN 同機身編號。
我打過電話去 藝康問，佢話F65 CHECK 機要$100。如果CHECK 機加零件超過機價1/4就唔整，換部FM3a。 |
新進會員
|
我的eos50用左三年,對焦平勁易入麈,又不能托唔開抹!
|
新進會員
|
數碼：
1) (995用)SK-E900同AS-E900只差一個爛鬼L鐵但差價就有2百幾；
2) Coolpix 995沒有Powerzoom；
菲林：
1) (EOS30用)BP-300沒有對焦點選擇制及command dial，如果有我比多2xx都會買；
|
新進會員
|
995加幾舊買條快門繩，就有power zoom… |
新進會員
|
brother kcy_kwok
I had tried the HK Contax dealer service for my T2 and TVS of my friend. Service was pretty good wor...because my T2 got a focusing problem and TST Camera service centre quote me $1000 or more(actually, they sent the contax gear to dealer service and charge the client with mark-up). Finally, $7xx with a new focus dial shaft and alignment. As my AX used for 5-years, i may send it back to KT dealer for alignment......Good luck for all Contax Fan!!! |
